Hello all,
I've been working in figure modeling since I was 16, I lived in Lier in Belgium.
The city where Francois Verlinden had his toy shop and later his factory Verlinden Productions, before he moved to the USA.
I was a regular customer at Verlinden and learned a lot from him. A little over a year ago I read two books written in "German" about Eduard Dietl. I knew that I had from Verlinden Productions a 1/35 scale figure from Eduard Dietl, (it was # 1172 German Mountain General) but it was without a doubt Eduard Dietl.
Then I started searching if there was no resin bust on 1/10 scale from Eduard Dietl. After a long search, I only found a bust of Julius "Papa" Ringel (also a Mountain General), who was no longer in production.
So I started building with leftovers from other German 1/10 figures to make a bust without a head. I also spent 15 years at the drawing academy where we got sculpting but that was not really my specialty. So sculpting the head of Eduard Dietl myself was no go.
So I went searching for people here in Belgium who were working in 3D design and who were perhaps willing to make a design from Eduard Dietl head based on photos. And maybe could manufacture resin copies via the use of a mold. Now many of them naturally asked who this person was and when I told them, they had moral objections and refused to make war figures.
Eventually I found the solution at the Spanish model company Scale75. They made the head via 3D design, made a master model and then a mold. I had also ordered 10 copies from the head of Eduard Dietl, for a few friends and club members who also wanted to work around Eduard Dietl.
So I have added some pictures from the bust I made and the ead that Scale 75 made for me.
My Generaloberst Eduard Dietl Bust scale 1/10
Moderator: John W. Howard
My Generaloberst Eduard Dietl Bust scale 1/10
- Attachments
-
- Detail of the Heeresbergführer badge
- IMG_20180917_220309[1].jpg (37.52 KiB) Viewed 5288 times
-
- Bust of Eduard Dietl
- IMG_20180917_220239[1].jpg (42.59 KiB) Viewed 5288 times
-
- Head made by Scale75
- IMG_6329.JPG (28.68 KiB) Viewed 5288 times
-
- Master print of the head
- IMG_6327.JPG (39.07 KiB) Viewed 5288 times
-
- Not painted head put on the bust.
- IMG_6325.JPG (62.46 KiB) Viewed 5288 times
Re: My Generaloberst Eduard Dietl Bust scale 1/10
When the head is painted and the figure is put together I willadd some extra pictures.
Re: My Generaloberst Eduard Dietl Bust scale 1/10
So here´s the final result of painting the head!
- Prosper Vandenbroucke
- Enthusiast
- Posts: 481
- Joined: Wed Oct 23, 2002 12:01 pm
- Location: Braine le Comte - Belgium
- Contact:
Re: My Generaloberst Eduard Dietl Bust scale 1/10
Very, very good job
Congratultions
Kindly regards
Prosper
Congratultions
Kindly regards
Prosper